USING SPICE MODELS

Overview

Many component manufacturers publish SPICE compatible simulator models for their product lines, and a model of this kind can be brought into a Proteus design and simulated alongside everything else on the schematic. Because PROSPICE is built on the original Berkeley SPICE code you should have relatively few problems in doing so, but there are a few things you need to understand first.

This chapter is in three parts.

  • Understanding SPICE Models explains what a SPICE model actually is, how its nodes are bound to the pins of a schematic part, and which parts of the various SPICE dialects are accepted.
  • Attaching a SPICE Model is the working reference: the five device properties that bind a model to a component, how to add them with Make Device, and worked examples of a subcircuit model, a model card model, a model taken from a binary model library and a model typed straight onto the schematic.
  • When a SPICE Model Will Not Simulate lists the messages a failed model produces, what each of them means, and what to do about it.

See Also:

Types of Simulator Model

Troubleshooting